Download SheetCAM v6.0.28
SheetCam is a low cost but feature packed CAM package. SheetCam is suitable for milling, routing, plasma, waterjet, laser and oxy-fuel cutting
SheetCam has many useful features for plasma, laser, waterjet and oxy-fuel cutting.
For machines that have full control over the Z axis you can program the pierce height and cut height directly. This is useful for machines running Mach3 for instance. SheetCam combined witn Mach3 and a torch height controller from CandCNC for an unbeatable plasma cutting solution.
The tool definition allows you define all of the important parameters for cutting. You can define as many tools as you like for different materials etc.
- Kerf width. Draw your part the size you want and let SheetCam work out where to run the torch.
- Automatic cut ordering to ensure that inside contours are always cut before outside contours.
- Oxy-fuel preheat time.
- Pierce delay time.
- Optional ramp piercing. Instead of plunging straight in, the cutter torch can ramp in, reducing the amount of material blown back into the torch. This increases consumable life and reduces faulty cuts due to blocked or obstructed nozzles
Download SheetCAM v6
Download SheetCAM v6.0.28 / v5
Donate and download files with Unlimited Speed, NO ads and NO Wait.
install SheetCAM v6
see the readme file
Chạy Setup cài đặt phần mềm SheetCAM v6
Chạy file “KeyGen_SheetCam_TNG” với quyền Admin (click chuột phải chọn run as administrator) >> Generate sẽ xuất hiện file “license.camlic“
Tắt kết nối internet
Mở phần mềm >> Help >> Install license file và tìm đường dẫn đến file “license.camlic” đã tạo dc ở trên