Nemetschek SCIA Engineer 21.1

Download Nemetschek SCIA Engineer 21.1

SCIA Engineer

POWERFUL STRUCTURAL ANALYSIS SOFTWARE & DESIGN TOOLS

With SCIA Engineer, you get the powerful structural engineering software to model, analyze and optimize a 3D model of any structure, material or load condition, quickly and accurately, using a familiar, logical and intuitive CAD-like user interface.

All-in-one, flexible, advanced analysis - Enjoy the freedom to model anything, with just one tool to handle all your projects thanks to powerful analysis options.

The perfect productivity booster - Integrated cutting-edge technologies such parallel processing, automatic mesh generation, as well as innovative optimization and reporting tools.

Understand and control your model - Have full control over all your project data and design your structure with confidence in the results thanks to comprehensive codes and detailed outputs.

More connected with BIM workflows - SCIA Engineer plugs into any BIM workflow, seamlessly exchanging model data with other project stakeholders.

required system

HARDWARE COMPONENTS

MinimumAdvised
ProcessorIntel Core-i5 or AMD Ryzen 5 or similarIntel Core-i7 or AMD Ryzen 7 or similar
Memory (RAM)8 GB32 GB, or more
Graphics Controller256 MB, supporting OpenGL4 GB, or more
Free disk space5 GB, SSD/
ResolutionFull High Definition */

* 4K is supported for the new interface of SCIA Engineer 21

A 3D mouse is not supported.

SOFTWARE COMPONENTS

Supported Windows OSWindows Server 2008 R2 (64 bit), but only licensing is tested Windows Server 2012 R2 (64 bit) Windows Server 2016 (64 bit) Windows Server 2019 (64 bit) Windows 10 (64 bit)
API link with Revit (http://www.scia.net/revit)SCIA Engineer 21 is compatible with: Revit 2020, Revit 2021
API link with TeklaSCIA Engineer 21 is compatible with: Tekla Structures 2019 Tekla Structures 2019i Tekla Structures 2020
EtabsSCIA Engineer 21 is compatible with: Etabs 9.2
IFCSCIA Engineer 21 is compatible with: IFC version 2 × 3 IFC4 (import only)
SDNFSCIA Engineer 21 is compatible with: SDNF version 2.0 SDNF version 3.0

Below you can find additional information regarding the hardware components.

PROCESSOR

For the processor two parameters are important: the number of cores and the clock frequency. When you perform a linear calculation, the number of cores is the main parameter that determines the speed of the calculation. In a nonlinear and eigenmode calculation, the clock frequency is the determining factor. Next to the previously mentioned calculation types, the design checks run multicore as well. We advise an Intel Core i7 or AMD Ryzen 7 with at least 2.4 GHz.

MEMORY (RAM)

SCIA Engineer, the solver and the Engineering Report are 3 separate processes that each require memory to perform their actions. Next to these processes, also Windows (min. 1.5 GB) and all other applications take some memory in use as well. To not run out of memory when performing memory demanding calculations, we advise to have at least 16 GB or more RAM in the computer.

GRAPHICS CONTROLLER

A minimum memory of 256 MB and the support of OpenGL is required to run SCIA Engineer. This means that SCIA can also be run with an onboard graphics card. For some models that are graphically more demanding, the onboard graphics card may fail to render the structure. For this reason, we advise a dedicated GPU (Graphical Processing Unit). A low to mid end GPU should be adequate.

HARD DISK

Every hard disk with a free disk space of 5 GB can be used to run SCIA Engineer. This does not mean that the HDD is not important. The read / write speed of the HDD has an influence on the performance of SCIA Engineer. In order to increase performance, we recommend an SSD (Solid State Drive). Some available SSD types are:

  • (m) SATA: cheap, worst performance;
  • M.2: best price / quality ration;
  • PCIe: expensive, best performance.

Download Nemetschek SCIA Engineer 21.1

100

Nemetschek SCIA Engineer 21.1

contact:

Email: [email protected]

telegram: @ttpm2020

FaceBook: thuthuatphanmem.top

Nemetschek SCIA Engineer v19.1 free

password: 2020

Download guide

Xem hướng dẫn tải

Link tốc độ cao, không cần chờ chỉ với 10k ( liên hệ với chúng tôi)

install SCIA Engineer 19

– Install SCIA, use “Only floating” license option, set license server to: [email protected]

– Install Scia License server: flexnet_setup_2.2.5.exe
Do NOT install dongle drivers and do NOT run activation manager

– Run Start Menu->Scia Licence Server->FlexNET Licence administrator

– Go to “Administration” tab, choose “Server Configuration”->”License Server Configuration” (use “admin” as login/pass)

Warning:

if ask for updated the account use the same on old and new account login/pass : admin/admin thanks!

– Set “License Server Manager Port” to 7182
– Press “Save” button and “Stop Server” above ignoring warning

– Copy “SCIA_Software.lic” and “scia.exe” to the folder: {Program Files (x86)}\Common Files\Scia\LicenceServer\FlexnetServer\scia\

– Reboot PC

– Start SCIA, enter settings and select the licenses you need
License path should be [email protected]

PS: your firewall/AV may block license service, do something then.

IMPORTANT NOTE:
New/Open Button disabled!
ALWAYS use Project Manager to new and open project and always open project from Project template folder;
C:\Program Files (x86)\SCIA\Engineer18.0\Project Templates\

Phiên bản cũ hơn xem file readme đính kèm